Skip to content
Conner Tracker

Conner Tracker review: A shaped brim with a weathered finish

The brown Conner Tracker combines an outback profile, a wide brim and water-resistant fabric. Here's how to size it and where it fits.

We may earn a commission from these links.

The verdict

We may earn a commission when you buy through these links. How it works

Tracker Water Resistant Cotton Outback Hat

Best for
Walks, hiking, fishing and outdoor work where a broad brim and weathered finish suit the day.
The catch
Water resistance is not a waterproof shell

The short version

The Conner Tracker has the worn-leather look from a few feet away. Get closer and you can see it's fabric. The finish gives it some character, but the brim is what makes this hat worth a look: it has a defined shape and enough width to put shade around more than just your face.

Conner supplied the brown Tracker in a large for this review. Kit Authority may earn a commission from purchases made through its links or reader code.

The hat comes with two sizing strips for fine-tuning the fit. The chin cord and interior pocket are part of the hat, so the useful extras are already there rather than separate accessories to order.

Strengths

  • The brim provides coverage around the face, ears and neck
  • Weathered fabric gives it a broken-in appearance
  • Chin cord and two included sizing strips help dial in the fit

Tradeoffs

  • Water resistance is not a waterproof shell
  • Leaving it crushed for storage can crease the fabric
  • Head shape still matters alongside the size chart

How I tested it

Conner Tracker reviewWatch on YouTube

I examined and wore the supplied Brown / Large Tracker, looking at its finish and brim coverage.

  1. Looked closely at the fabric and its weathered appearance.
  2. Flexed the brim and observed the lighter crease marks.
  3. Wore the hat and looked at how the brim shaded my ears and neck as I turned.

Conner supplied the Brown / Large review sample.

The brim is the point

Conner lists the brim at 2.75 inches and the crown at 4.5 inches. The sides dip rather than sticking straight out, giving the Tracker a more shaped profile than a flat-brimmed sun hat. The taller crown makes it a distinctive-looking hat from the side, too. That's part of the appeal, though anyone who wants a low-profile cap should look elsewhere.

When I wore the Tracker and turned, the brim’s shadow reached past my ears and across my neck. A brim gives shade that moves with your head, helping cover the ears and neck as well as the face. Coverage changes with the angle of the sun and the way the hat sits, so it doesn't replace sunscreen or other protection. Conner rates the material UPF 50+ and says it tests its hat materials with ARPANSA. The product page also identifies the brim width and crown height.

The Tracker's shape is a good fit for walking, fishing or a day outdoors when you want a proper brim without looking as if you borrowed a dinner plate. For a wider range of shapes and ventilation options, compare it with our best sun hats for hiking.

Joel wearing the Conner Tracker outdoors
The Tracker’s shaped brim outdoors.

Weathered fabric and construction

Conner calls the material weathered cotton. It's a 52% cotton and 48% polyester blend, with an organic cotton sweatband against the forehead. Conner also lists algae-based foam inside the brim. Those details come from the Tracker specifications.

The finish has the look of a hat that's already been around a while. Flex the brim and lighter marks appear where the fabric creases. The brim can be shaped by hand, while the foam gives it some structure. This isn't a rigid leather hat; the fabric and shaped brim are central to both its look and how it packs.

There is a small pocket inside the crown for a card or folded cash, with a hook-and-loop closure. It's a convenient place for a hotel key when you don't want it loose in a pocket. The adjustable chin cord and sliding toggle are the more consequential details on a breezy trail or boat: they give you a way to keep the hat attached when a gust arrives.

Inside the Conner Tracker, showing the sweatband and material labels
The sweatband and labels inside the crown.

Getting the right size

The sample is Brown / Large. Conner's chart puts Large at a head measurement of 22¾ to 23¼ inches, or 58 to 59 centimeters. Measure around your head just above the ears where the hat will sit, then compare that number with the manufacturer's size chart. Size is a starting point; head shape can change how a hat feels.

Conner includes two sizing strips with orders and recommends choosing the larger size if you're between sizes, then using the strips to reduce extra room. Fold down the sweatband and place a strip behind it, then try the hat before adding the second. Conner's sizing-strip guide shows the placement.

Pack clearance matters alongside head size. A rear brim that catches the top of a loaded backpack can become irritating when you look uphill. The Tracker's rear brim is one of the details to check with your own pack; the chin cord is useful for retention, while the size and inserts determine how the hat sits.

Rain, packing and care

The Tracker is water-resistant, not waterproof. Conner describes the fabric as suitable for light rain and splashes; it isn't a substitute for a rain hood in prolonged weather. The absence of open mesh also gives this model a different proposition from a ventilated summer hat. On a hot, still day, ventilation may matter more to you than the Tracker's finish and water resistance.

Conner says it can be crushed flat for a short time, not indefinitely packed into the bottom of a bag. When packing a suitcase, fill the crown with soft clothing and keep the brim flat so the hat has support around it. After it gets wet, let it air dry before putting it away. For dirt, Conner recommends spot cleaning cloth hats with a damp cloth and cold water in its hat-care guide.

Specifications

Feature Conner Tracker
Sample Brown, Large
Material 52% cotton, 48% polyester
Brim 2.75 in, with algae-based foam
Crown 4.5 in
Sun rating UPF 50+ material, per Conner
Weather Water-resistant
Fit details Chin cord and toggle; two sizing strips included
Large size 22¾–23¼ in / 58–59 cm head circumference

Source: Conner's Tracker product page.

Verdict

The Tracker's appeal is the combination of that weathered finish, shaped brim and practical coverage. It looks at home on a trail without demanding to come off when you stop for lunch. Buy it for that style, the fine-tuned fit and light-rain resistance. A lighter, more ventilated model is worth comparing for a hot hike, especially if you value airflow above the outback shape.

Buy from Conner Hats

Conner provided KITAUTHORITY10 for 10% off reader orders. Check the current offer and size availability when ordering.

Common questions

Is the Conner Tracker waterproof?

No. Conner describes it as water-resistant for light rain and splashes. Let it dry naturally if it gets wet.

How do I choose a Tracker size?

Measure around your head just above your ears and use Conner's chart. The company recommends the larger size between sizes, with the included strips to take up extra room.

Can I pack the Tracker flat?

Conner says it can be flattened for a short time. For travel, support the crown with soft clothing and keep the brim flat rather than leaving it crushed under heavy gear.

Share this review

Keep going

Related buying guideBest sun hats for hiking (2026)Daypack, hydration bladder, first aid kit, headlamp, and sun hat laid out for a hikeComplete hike loadoutDay hike kitBuild the complete kit

The weekly Kit briefing

New research, useful recommendation changes, and the strongest work from the week. One email, no daily churn.

Hands-on tested

Updated Nov 18, 2026

Our verdict includes direct setup and use observations, checked against current specifications and owner-feedback patterns.

As an Amazon Associate I earn from qualifying purchases. We may earn a commission from links here, at no extra cost to you. How we research →